HARDWARE INSTALLATION
KP-5360 Fanless POS Terminal
11
Step 3 Fix the customer display into the bracket and then fix them onto the main unit
with 2 screws. Plug the wafer connector to the COM 6 port with DC 5V on the
I/O board as shown in the picture. (Figure 2-f)
F
igure
2-d
Figure
2-e
F
igure
2-f
Figure
2-g
Step 4 Cover the screw holes with plastic lids and reinstall the rear cover.
(Figure 2-h, 2-i)
F
igure
2-h
Figure
2-i
ATTENTION
If the customer display doesn’t work properly, please refer to CH.6 Troubleshooting.
2.1.3 Second Display Installation
All manuals and user guides at all-guides.com
