Applifast AirPower 1, Repair Manual

Page: 14 / 44

- 13 -
SERIE 1 SERIE 2 SERIE 3
Assembly:
Pour hydraulic oil KERNITE IGM ISO 32 in to pos. A73 up to the second sealing in pos. A73.
Lubricate outer surface of pos. 59 with LUKOSAN paste., put pos. 59 on pos. A73 to the distance
different according to tools type (see pictures), screw on MP19, MP20 or MP20+MP21 to the
stop, screw MP13, filled with hydraulic oil, on pos. 59. Connect CA, slowly and repeatedly press
and release piston MP13 as long as air bubbles leak from MP13. MP13 has to always be filled
with hydraulic oil, if not , fill the oil in. After pouring hydraulic oil in to hydraulic systém of the
riveting tool, disconnect CA and screw off pos. MP13 and MP19, MP20 or MP20+MP21. Put
pos. 60 on pos. 61 and screw it on pos. 59 with imbus key nr. 3. Put MP15A on pos. 59, then
press MP15A with wrench and tighten pos. 61 with imbus nr. 3. Remove MP15A.