Applied
Truss and Electronics
LA35 TOWER INSTRUCTIONS
ITEM# 35FT 1-35-216
30FT 1-30-216
STEP#4
RIGGING CHAIN HOIST
11
A
11
B
11
C
12
35' TOWER MAY BE BUILT WITH
(3) 10' SECTIONS & (1) 5' TWR HINGE
WHAT IS PICTURED MAY NOT BE YOUR SYSTEM
BUT, THEY ALL FUNCTION THE SAME WAY!
A) RIG MOTOR TO V-BASE.
B) FEED CHAIN OVER THE WHEEL AT THE TOP OF
THE TOWER LIFTING LADDER.
C) LAY CHAIN ALONG THE TOWER AND RUN
CHAIN OVER BOTH WHEELS OF THE HEAD BLOCK.
(MAKING SURE TO ELIMINATE ANY CHAIN TWIST)
D) ATTACH CHAIN HOOK TO LOWER TOWER SECTION
WITH A ROUND SLING AND SHACKLE.
CHECK ALL BOLTS AND CLAMPS BEFORE PROCEEDING.
A
B
C
D
8
LA16-30 / LA16-35 TOWER
INSTRUCTIONS
A
STEP #4
RIGGING TO RAISE TOWER
CAUTION: *IMPORTANT*
TAKE CARE TO ELIMINATE ANY CHAIN TWISTS &
MAKE SURE CHAIN IS ALIGNED IN HEAD BLOCK
WHEELS, BEFORE RAISING TOWER.
CAUTION:
TAKE CARE TO ELIMINATE ANY CHAIN TWISTS &
MAKE SURE CHAIN IS ALIGNED IN HEAD BLOCK
WHEELS, BEFORE RAISING TOWER.
PROUDLY MADE IN THE U.S.A.
722 Blue Crab Road
Newport News, VA 23606
757.591.9371 / fax 757.591.9514
www.appliednn.com
REVISED: 02Oct19
