Applied
Truss and Electronics
Rope over head block.
STEP#4
ATTACH CABLE &
RAISE TOWER
7
L-25 MINI TOWER
INSTRUCTIONS
A) Unwrap the cable and feed it around the head block (remove and replace retaining
pins above the pulleys) and connect to the slide block aligning the thimble between the
angles and inserting the clevis pin.
B) If towers are outside, now is a good time to attach the guy wires. Refer to the
engineering document for number and locations of guy wires.
C) We suggest attaching a rope over the top of the tower, down
the other side and secured at a location you can reach from the
ground. Have 1 person pull the rope while 2 people walk up the
tower to vertical. Disconnect the rope once the tower is secure.
PROUDLY MADE IN THE U.S.A.
722 Blue Crab Road
Newport News, VA 23606
757.591.9371 / fax 757.591.9514
www.appliednn.com
REVISED: 10/24/2017