Applied
Electronics
Proudly Made in USA
?
Applied
Truss and Electronics
2
REQUIREMENTS FOR SAFE USE
1) Build Tower on flat surface.
2) For outdoor use, 3/4 plywood is suggested
under tower column and thick wood or metal plates should
be used under leveling pads.
3) All leveling pads must be seated solidly.
4) All hardware must be Grade 5 minimum.
THIS TOWER SHOULD BE ASSEMBLED/ERECTED
BY QUALIFIED RIGGERS.
BILL OF GOODS
QTY: (1) 25' L-25 Mini Tower
(1) HINGED BASE ASSEMBLY
(1) 10’ TOWER TRUSS
(1) 7’ TOWER TRUSS
(1) 3’ TOWER TRUSS
(1) HEAD BLOCK
(1) SLIDE BLOCK
(4) LEGS W/ FOOT LEVELER ASSEMBLY
(4) LEG BRACES
(1) WINCH
(1) CABLE
(1) SAFETY BLOCK STOP
(1) SLIDE BLOCK CLEVIS PIN
TOWER HARDWARE
(40) 3/8 X 1 1/4" GRADE 5 BOLT SETS
WITH (40) WASHERS AND (40) FLANGE NUTS
LEG HARDWARE
(9) 3/8 X 3 1/2" GRADE 5 BOLT SETS
WITH (16) WASHERS AND (8) FLANGE NUTS
(3) 3 1/2" QUICK RELEASE T-PINS
WINCH HARDWARE
(5) 3/8 X 1 1/4" GRADE 5 BOLT SETS
WITH (5) WASHERS AND (5) FLANGE NUTS
SAFETY STOP HARDWARE
(1) 1/2 X 4 1/2" GRADE 8 BOLT SET
WITH (2) WASHERS AND (1) NUT
(1) SET OF BUILD INSTRUCTIONS
Shipped on 1 pallet
L-25 MINI TOWER
INSTRUCTIONS
ALWAYS...IF YOU HAVE QUESTIONS, PLEASE CALL!
(757)591-9371
PROUDLY MADE IN THE U.S.A.
722 Blue Crab Road
Newport News, VA 23606
757.591.9371 / fax 757.591.9514
www.appliednn.com
REVISED: 10/24/2017
