Troubleshooting Guide
Symptom Possible
Problem
Notes
Poor Range
Antenna
Receiver Antenna connected, vertically oriented and
placed preferably at least 7' high and away from metal
surfaces.
Antenna will not work inside a metal box.
RF Interference
Check equipment operation at a different location.
Battery
If the remote transmitter has an indicator LED, does it light
brightly when button is pressed? If not, replace battery.
Doesn't Work
Power
Check power to receiver (power LED lights?)
Relay Connection
Verify connected to the correct Relay-For 1-button
remotes, Relay 2 is used; for 2-button remotes, relays 1
and 3 are used.
ID Code Match
Re-"Learn" remote to receiver. MUST BE DONE WITH
ANTENNA REMOVED.
Re-Boot Needed
Remove power from receiver for at least 5 seconds.
Applied Wireless products are designed and manufactured
with pride in the United States of America
Copyright 2007 by Applied Wireless, Inc. All rights reserved.
Specifications subject to change without notice.
A
PPLIED
W
IRELESS
,
I
NC
.
1250 Avenida Acaso, Camarillo, CA 93012
Phone: 805-383-9600 Fax: 805-383-9001
Email: [email protected]
www.appliedwireless.com
Pub. # UG-RCR24SS
Rev. date 5/12
