Page 8
Operating the Function Buttons
Pressing the function buttons on the controller board will simultaneously send the designated command
to the cameras connected to the controller.
The buttons on the board are defined as follows:
Power
When the cameras are properly connected and the board is powered on, pressing the Power button will
simultaneously turn power on to both cameras. If the cameras are on when this button is pressed, the
controller will simultaneously turn power off to both cameras.
Focus
When the Focus button is pressed, the controller will simultaneously activate the autofocus function on
both cameras.
Shutter
When the Shutter button is pressed, the shutter function is activated on both cameras simultaneously.
This will either cause a photo to be taken or for a video to be recorded, depending on the configuration
of the camera.