Page 4
Video In from Cameras
The Video In jack is connected to the composite video output on each camera. This allows the controller
to monitor and display the difference in the video sync signals between the two cameras connected.
The black plug end connects to the camera’s composite video out connection. On the other end of the
cable, connect the yellow plug to the video in jack on the controller board. Two cables are required for
connection of both cameras.
Connecting to External Power
The controller board comes with a power adapter cable that connects to the camera’s DC power supply
to the controller board. Plug this cable into the camera’s power adapter and then into the controller
board in the Board Power In.
Optional : Connecting to buttons mounted off the controller board
To facilitate a wide range of board mounting options, we have includes a header on the board that can
be used to connect remote momentary button switches mounted off the controller board for camera
control. This allows the user to optimally position these control buttons (Power, Focus, Shutter) in the
product housing, enclosure, or other type of case being configured.