Proof of Performance Testing with a Super Buddy
Page 8 of 10
After the Limit Scan is complete, a screen will appear that allows you to type in the date, location,
technician name or ID number, and any notes. Use the numeric keypad to fill in these fields and
then press the SAVE soft-key.
Then you must type in a unique file name for this Limit Scan. An error message will appear if you
enter a name that has already been used. At present, there is no method for determining which
names have been used on the instrument other than by running the SatTransfer program.
After you type in the file name using the numeric keypad, press “SAVE” again and the system will
copy the file from temporary storage to flash file storage. The instrument must then restart and
go through the initialization count-down.
