Proof of Performance Testing with a Super Buddy
Page 4 of 10
you want to scan. Press the Enter key to move cursor to next field after typing in each desired
value. You may edit the required IRD value for each transponder. These IRD values apply only
to the selected satellite and specific transponder. You may also edit the signal level limit which
applies to all transponders on all satellites.
To remove a transponder, enter zero for the transponder number.
If all transponders have been zeroed for a satellite, that orbit will be removed from the table.
You may also use the “TR#” key to insert a valid transponder number from the list of
transponders for that satellite. When your cursor is in the Transponder (Tr) column field, pressing
the TR# soft key several times will allow you to numerically scroll through the different
transponders.
Press DONE when you have entered the desired values to return to the Limit Scan screen to let
the Limit Scan begin or press EXIT to return to the main Run screen where your bar graphs are
found.
