manualshive.com logo in svg

Applied Engineering Viewmaster 80, User Manual, Page: 37 / 37

Share
Download
Applied Engineering Viewmaster 80 User Manual Download Page 37

When You Ship

If you don't have the original packing material, wrap the board in 
anti-static material (preferably the anti-static bag in which the card 
was originally shipped; however, aluminum foil will work fine). Pack 
it in a sturdy box cushioned with wadded papers (i.e. used computer 
paper or newspaper).

Warning:

 If your product is damaged due to inadequate 

packing, your warranty will be void.

Include the return form and invoice.

Send the package, shipping prepaid, to:

RMA#_ _ ? _ _
Applied Engineering
Technical Support
3210 Belt Line Road, Suite 154
Dallas TX 75234

You should insure your package. Æ will not assume any 
responsibility for inadequate packing or loss or damage during 
shipping.

When We Receive

Our service department will use your completed form in an attempt 
to duplicate the problem.

If it is determined that your product is defective due to a 
manufacturing defect, your card will be repaired or replaced at Æ’s 
option.

Any misuse, abuse, or non-Æ authorized alteration, modification, 
and/or repair to the Applied Engineering product will void the 
warranty. This warranty will also be void if you use the Æ product 
for any purpose other than its intended use.

Your product will be fully tested before it is shipped back to you, 
transportation prepaid, via UPS regular delivery.

Once your product is received by Technical Support, it will be 
processed and delivered to our shipping department within 7 to 10 
working days.

28 

ViewMaster 80

Summary of Contents for Viewmaster 80






































Reviews:

No comments