CSPP Capacitor Charging Unit Operation Manual
CSP-CSPP-8000/2
_________________________________________________________________________________________________________
__________________________________________________________________________________________________________
Page
23
of
59
Safety Features
Should any fault develop, the high voltage PSU (Charger) and all capacitors (which have bleed
resistors) are individually dumped to ground, until the system is reset. A double layer of safety cut-
outs ensure that partial failure results in system shutdown.
Interlocks
: Dumps high voltage when fault develops.
Time Out
: Shut down after period (~30 seconds) without key pulse.
Local/Remote
: Disables remote (if fitted).
Load
: Shuts down HV upon open circuit load or load over current.
Reset
: Resets unit after fault or if interlock activated.
Open circuit detect
: Disables firing when an open circuit load is present.
Output current detect
: Shuts unit down if current exceeds a pre-determined level.
Thermal shut-down
: HV charger shuts down if it overheats. HV Discharge semiconductor
thermally protected
– unit will shut down if overheats.
Options
Remote
: Allows operator to control unit at a distance. Includes key
pulse line.
Junction Box
: For connection of standard transducer cables to HV
connector.
Shock Mount Housing
: For transportation and operation. (Recommended.)
Transit Case
: For storage and transportation. Foam lined.
Field Spares Kit
: For trained technicians only. For servicing units in the field.
Although correct at time of printing, these specifications are subject to change without notice.
