14
Completing the installation
If you are setting the appliance to recirculation mode, then you should now fit the two
carbon filters. See the section “Fitting the carbon filter” on page 9.
The electrical connection must correspond to the electrical requirement noted on the
rating plate, which is placed inside the rangehood. The appliance should now be
connected to the electrical supply. See page 10 for detailed information on the electrical
connection.
Refit the grease filter and then switch on the mains supply to the appliance. Check that
the appliance is operating correctly by selecting each speed and switching the light bulb
on and off.
Packing list
Opening the box, you will find the following items :
Description
Illustration
QTY
Cooker hood
1
Screw (ST4 x
18mm)
8
Extraction mode or recirculation mode?
IMPORTANT:
You will have to decide prior to installing your rangehood whether to use it
in extraction mode or recirculation mode.
What is the difference between extraction and recirculation modes?
In extraction mode, the stale air will be taken via the grease filter and out of the room via
external ducting.
In recirculation mode stale air is taken via the grease filter, and passed through a charcoal
filter for purification. The air then re-enters the kitchen via an opening in the rangehood.
For optimum performance, we recommend that the rangehood is used in extraction mode
and connected to external ducting.
