9
o
Press gently on the underside of the bulb that needs to be replaced and twist
anticlockwise to release.
o
Replace in reverse order using
only
genuine spare part
SYKL25
.
o
IMPORTANT:
Defective bulbs should be replaced immediately.
o
If the light still does not work, make sure that the internal plug is fitted properly
before you call for technical assistance.
Fitting the carbon filter (Part number ST1)
If the appliance is going to be used in recirculation mode then it is necessary to fit a carbon
filter. This will help to absorb unpleasant odours caused by cooking.
IMPORTANT:
Before attempting to
fit
or remove the carbon filters,
you must ensure the rangehood is switched off first.
1)
Press the handle of the metal grease filter towards the rear
p art of the unit until it is released from the front housing, and
remove it by pressing downwards (Fig. 2 - above).
2)
Remove the old carbon filters by twisting them anticlockwise
until they unlatch from the sides of the motor.
3)
Place the new carbon filters ( which have two fixing
tongues), turning clockwise so that the tongues latch onto
the motor’s sides.
