Installation
The installation must be carried out by an
o
AS/NZS 3000:2007 Wiring Regulations
a bathroom or shower room.
etween the highest point of the hob surface (including
iding that the underside
e with the outer edge of the hob.
horizontal surface is lower than 400 mm,
of the
nce, measured from the cut out and between the hob
liance
ng the appliance please check that the following items
Authorised Service Agent, in accordance with the
current version of the following.
o
2010 Electricity Safety Regulations
Positioning
The adjacent furniture must be able to withstand a
minimum temperature rise of 85°C above the ambient
temperature of the room it is located in, during
periods of use.
o
This appliance can be located in a kitchen, a kitchen diner or a
bed sitting room. IMPORTANT: The appliance must not be
installed in
This appliance is classified as Class 3 and therefore is to be built into a
kitchen unit (depending on size) or 600mm worktop, providing the
following minimum distances are allowed:
o
700 mm b
the burners) and the underside of any horizontal surface directly
above it.
o
400 mm between the hob surface, prov
of the horizontal surface is in lin
If the underside of the
then it must be at least 50 mm away from the outer edges of
the hob.
o
50 mm clearance around the front, back and sides
applia
surface and any combustible materials.
Unpacking the app
When unpacki
are contained within the packaging:
1 x Hob
Pan stands
Burner assemblies
Instruction manual
Warranty card
17
