21
Basic Operation
Method 1: Setup the power value by using the numeric keypad
Table 4-4 Setup resistance value(R-Set) by using numeric keypad
Procedure Operation details
Step 1 Press
R-Set
If the mode is not the CR mode, press
R-Set again.
Step 2 Enter a new value using numeric keypad or rotary the knob to adjust the value.
Example: press key
1
0
.
5
Step 3 Press
Enter
to confirm this input
Method 2: Setup the resistance value by using knob.
The value can be continually changed from the previews value according to the knob
rotation.
The knob rotation magnification can be set in Menu-Knob item.
4.2
Functions of Operation
AT851 includes six functions of operation.
1.
Normal Operation [CC/CV/CP/CR]
2.
Transient Operation [TRN]
3.
Sequence List Operation [SEQ]
4.
Automatic Testing Function [ATF]
5.
Battery Testing Function [BAT]
6.
Short Circuit Testing Function [SHT]
Figure 4-5
Functions of
Operation
Normal
Operation
CC/CV/CP/CR
Transient Operation
TRN
Sequence List
Operation
SEQ
Automatic Testing
Function
ATF
Battery Testing
Function
BAT
Short Circuit
Testing Function
SHT
4.3
Setup the Maximum Current [I-max]
Press
Shift
+
I-max
to enter I-MAX setup page
：
Figure 4-6
I-max Setup Page
Two methods are used to input the I-max value:
1
st
: The value can be continually changed from the previews value according to the
knob rotation. The knob rotation magnification can be set in Menu-Knob item.
2
nd
: Using numeric keypad to input value.
