10
Installation Steps
1. Wall Mount Installation Steps:
1
）
position for digging hole on the wall, and install expansion screw.
Make the cover parts guide line through the bracket to the wall bracket,
and fix the M6*16 screw. (as picture 3)
Picture 3
2. Pendant Mount Installation steps:
2
）
position for digging hole on the wall, and install expansion screw. Fix
connector with M6*16 screw, make the cover parts guide line through
the bracket to the pendant bracket, fix the whole set to the ceiling. (as
picture 4)
Picture 4
39
3.
Under
【
PANTILT SETTING
】
choose
【
AUTOSCAN SETUP
】
and press
【
OPEN
】
for confirming.
4.
Under
【
AUTOSCAN SETUP
】
press
【
AUTOSCAN NUMBER
】
for
entering into the auto scan number change setting and the parameter will
flicker.
5.
Up/down P/T for setting.
6.
Press
【
OPEN
】
for confirm, save and exit; press
【
CLOSE
】
exit directly.
z
SET LEFT LIMIT
)
Operations
：
1.
Under
【
AUTOSCAN SETTING
】
choose
【
SET LEFT LIMIT
】
and
press
【
OPEN
】
for entering into the scan left edge setting
。
2.
The vertical and horizontal position will be showed on the
downside of the screen when the users operate the machine. Press
【
OPEN
】
when the scan left edge has been set and the system will
automatically record the current level position as the left edge on
scanning
。
3.
Press
【
CLOSE
】
exit directly
。
Instruction
：
1.
The scan left edge could be set at any point at the
360°horizontally
；
2. The right edge setting is the same as the left, please
refer to the setting way of the left.
z
DEFAULT SPEED
Adjust level scan speed, level 1-64 selectable.
)
Operations:
1.
Call preset point 95 to enter main
menu.
2.
Move cursor to choose
【
PANTILT SETTING
】
choose
【
AUTOSCAN
SETUP
】
item and press
【
OPEN
】
for confirm to enter scan function
set item.
3.
Under
【
AUTOSCAN SETUP
】
choose
【
DEFAULT SPEED
】
item and
press
【
OPEN
】
for confirm to enter default scan speed set item.
4.
Up/down P/T to change speed value, level 1~64 can select.
5.
Press
【
OPEN
】
for confirm, save and exit; press
【
CLOSE
】
and exit
directly.
