600840-000041 Stratus Power Installation Instructions
Rev. 1.0
Last Revised: December 15, 2016
Page 9 of 12
Pin 2:
GROUND
Pin 1:
POWER
Figure 3: Harness
2. Verify input power and polarity.
a. Connect aircraft power and ensure that the breaker is pushed in.
b. On the power harness, place the negative probe of a multimeter on Pin 2 and the
positive probe on Pin 1.
c. Measure the voltage across the two wires using a multimeter. The voltage
reading should be equal to your aircraft power.
d. Disconnect aircraft power.
3. Connect the power receptacle into the header on the back of Stratus Power.
Figure 4: Back of Stratus Power
