17A
EN
INTRODUCTION
1-1 Unpacking and Inspection
1-2 Meter Safety
1-3 Front Panel
Upon removing your new Digital Multimeter
from its packing, you should have the
following items:
1. Digital Multimeter.
2. Test lead (one black).
3. Test probe set.
4. Instruction manual.
5. Test Clip (black)
6. Carrying case.
Refer to Figure 1 and to the following
numbered steps to familiarize yourself
with the meter's front panel controls and
connectors.
1. Digital Display -
The digital display has
4200 counts LCD readout with auto
polarity, decimal point " " AC
、
DC
、
RANGE
、
HOLD
、
REL
、 、
、
、
M
Ω
or K
Ω
or
Ω
and Unit annunciators.
2. Function Switch -
Select the Function and
Range desired.
3. COMInput Terminal -
Ground input
connector.
4. V—
Ω
Input Terminal -
Positive input
connector for Volts, Ohms and Diode.
Terms as Marked on Equipment
ATTENTION —
Refer to manual.
DOUBLE INSULATION —
Protection
Class II
DANGER —
Risk of electric shock
Symbols in This Manual
This symbol indicates where cautionary
or other information is found in the
manual.
Battery
1
