APOLLO3D SATURN 10, User Manual, Page: 9 / 24

8
B) Saturn10P: Wait for the extruder to heat: Use the touch screen to select [Preheat]—[Add], Set
Extrusion temperature at 190 ° C.
(2) Put in Filament
A) Saturn10: Waiting a moment for temperature up to 180 ° C above, Use the push bottom to select
[Prepare]— [Move axis]—[Extruder]— [Move 10mm], Add by Clockwise knob, set about 50-100mm,
Ensure the length can be smoothly threaded.
B) Saturn10P: Use the touch screen to select [Extrusion]—[Add], Set about 50-100mm, Ensure the length
can be smoothly threaded.
(3) Cut the end of your filament to create a clean edge.
(4) Grasp the top of the extruder assembly and push the filament into the extruder's loading tube until
you can feel the motor pulling the filament in.
(5) Wait until you see plastic emerging from the extruder nozzle before pressing the control panel dial to
finish the filament load process.
(6) Fit the filament guide tube securely into the extruder's loading tube.
NOTE: Be very CAREFUL as the extruder can be very HOT!!!
2.2.2 Unloading filament
(1) Saturn10:
 Wait for the extruder to heat: Use the push bottom to select [Prepare]—[Preheat PLA] or [Preheat
ABS] (depend on your filament type)—[Preheat PLA End]or [Preheat ABS End].
 Waiting a moment for temperature up to 180 ° C above, Use the push bottom to select [Prepare]—
[Move axis]—[Extruder]—[Move 10mm], reduce by anti-clockwise knob, set about 50-100mm,
Ensure the length allows the filament to be drawn out.
(2) Saturn10P:
 Wait for the extruder to heat: Use the touch screen to select Preheat—Add, Set Extrusion
temperature at 190 ° C.
 Use the touch screen to select Extrusion—Eec, Set about 50-100mm, Ensure the length allows the
filament to be drawn out.
NOTE: Be very CAREFUL as the extruder can be very HOT!!!
3.Operation
3.1 Filament
3.1.1 Filament Compatibility
Saturn is equipped with patent extruder, which is suitable for PLA, ABS, PETG, Nylon.
While Saturn is adopted with open type filament system, we still suggest using Apollo3D filament. All
the Apollo3D filament is tested professionally, and are possessed of optimized configuration files, which
ensures perfect print effect.