Page 6
2.0 Installation
2.1 Installing the Hard Disk Player
1.
Connect the 12VDC power adapter cable to the back of the
Player and into the wall outlet
2.
Connect the USB ports of the Player to the PC using the
provided USB cable.
3.
Once you have recorded video on the DVR’s removable hard
drive, you can view it on your computer using the Hard Disk
Player:
a. Remove the hard disk drive from the DVR:
i.
Turn the DVR key to the “OFF” position.
ii.
Ensure the front panel LED lights are not illuminated.
iii.
Remove the hard disk drive.
b. Connect the hard disk drive to the Player.
c. Turn the Player ON by selecting the switch on the Player.
The power LED will illuminate indicating the Player is
powered on.
d. The PC should recognize that a new USB device has
been installed and you can now use the HDPlayer
software to view video. (Refer to section 3.0).
NOTE: You should always turn the Hard Disk Player OFF using the switch
on the back prior to removing the hard disk module.
Apollo Video Technology
24000-35
th
Avenue Southeast – Bothell, WA 98021
Toll Free: 888-AVT-USA1; Tel: 425.483.7100; Fax: 425.483.7200
www.apollovideo.com
