Apollo LIGHTING PROJECTOR, User Manual

Page: 4 / 12

APOLLO LIGHTING PROJECTOR 4
4. Connect to the computer
Insert the ILDA signal one port to the laser software output, Insert other port to the ILDA input.
Connect the control box to the PC with USB cable, put on the power of the software box, open the software on
PC. Now it’s the software control mode.
Note:
when using this mode, the control software speed must be less than the setting speed (it can’t more than
the scanner maX speed 20kpps), or the scanner will burn easily, and cause the problem of the laser, our company
charge for the maintain.
5. Master-slave on-line
1. Connect the devices as head-to tail (follow the picture).
2. Setting the working mode, make one laser to master. (Sound / Auto), others are slave (follow the picture).
FuNCTION TABLE:
Channel DMX512 code Control content
Control mode
0-49 Sound active mode
50-99 auto Beam mode
100-149 Auto Animation mode
160-199 Manual operation Sound active
200-255 auto mode, auto