D. OPERATION
&
NOTE:
Always read the manual before use.
D.1 GENERAL OPERATION
1. Insert the supplied power cable into the side of the pump and the plug into a
suitable power supply and press the power on button.
2. Turn the comfort setting to desired level and wait for 20-30 minutes (depending
on the mattress) for the mattress to be fully inflated by the pump.
O
nce the
L
ow
Pressure light goes out the
N
ormal Pressure light is on the mattress is ready to be
used.
3. The pump is automatically set and constantly in alternating mode. There is
no static mode on this product.
4. Adjust the comfort setting to the most comfortable level for the Patient, without
the mattress bottoming out. The pressure in the mattress will slowly increase or
decrease to the required level and the
N
ormal Pressure light will be on Green.
6
NOTE:
It is recommended that the comfort setting be set to maximum (1
5
0KG)
for the quickest inflation of the mattress for every first inflation or new use, the user
can then adjust the comfort setting to the desired level after the mattress has fully
inflated.
D.2CPR
This is for emergency use to deflate
air from the mattress. Disconnect the air
tubes from the mattress for even faster
deflation.
8
