C. INSTALLATION
After delivery check the system for any damage which may have occurred during
transit. If damaged in any way contact your supplier immediately.
C1 PUMP AND MATTRESS INSTALLATION
1. Place air mattress on top of the bed frame/platform. Please ensure foot sign is
at the bottom of the bed.
2. Hang the pump onto the foot end bed rail and adjust the hangers to a suitable
position for the pump. Alternatively, the pump may be placed on a flat surface.
3. If the pump wire mains wire could be a risk on the floor under the bed with the
use of other e
q
uipment, clip the mains cable into the cable management system on
the side of the mattress
4. Connect the air hose connectors from the mattress to the pump unit. Make sure
the connection is completely secured.
Lt.
NOTE:
Ensure the air hoses are not kinked or tucked under the mattress.
5. Plug power cord into electrical socket.
&
NOTE:
1. Make sure the pump is suitable for the power voltage
2. Removing the plug will disconnect the system
&
CAUTION:
The pump can only be used for the mattress recommended by the
Manufacturer. Do not use for any other purpose.
5. Press the power switch to turn the pump on.
7
