Updated 27/05/08
APOM0508
Apollo Bicycle Company Pty. Ltd. ABN: 60 001 914 469
37
Bicycle Suspension
To help combat some of the jarring associated with riding on rough terrain some Mountain
Bikes are fitted with suspension systems. Primarily suspension systems are built into the
forks or the rear of the frame, but can also be included in seat posts as well. By equipping
the bicycle with suspension can improve its comfort and handling properties,
and potentially enable the cyclist to rider faster. However, for safety reasons it is imperative
you still ride within your own limits. Over time as your riding capabilities improve you may
be able to fully appreciate and handle the bike’s features.
Please note, using your bicycle for competitive events, dirt biking, bicycle racing,
ramp riding, jumping, stunt riding, downhill racing or similar activities or training
for such competitive activities is not recommended.
The range of suspension systems available is vast and will not be detailed
comprehensively in this manual. Instead, if your bicycle is equipped with a suspension
system and you require further information, refer to the separate leaflet included with
your bike (where supplied) or seek assistance from your specialist dealer.
WARNING: Failure to inspect and correctly adjust the suspension system
may result in suspension malfunction, potentially causing you to lose control
and fall. Keep all exposed moving portions of the suspension system clean
and lubricated.
CAUTION: Suspension adjustment should only be made according to the
suspension system’s manufacturer instructions and recommendations.
Always test-ride your bicycle following alterations to the suspension adjustment,
looking for any changes to the bike’s handling and braking characteristics.
CAUTION: Always refer to the bicycle’s manufacturer before attempting
to retrofit suspension as not all bikes can be retrofitted with some types of
suspension. Please note changes from the original specifications may void
your bicycle warranty.
WARNING: Please note, the front of a bicycle fitted with suspension dips
under braking. The rider needs to familiarise themself with the suspension
system before attempting riding at great speeds or down hilling.
Failure to do so could cause the rider to lose control and fall.
Summary of Contents for 2009
Page 1: ...Bicycle Owner s Manual Technical Handbook 2009 ...
Page 71: ......
