1) In Pro Tools under “Set Up”> “Session”>”Clock Source”> “192 I/O #1, choose “Word Clock”
You will get a message that says “The Sync I/O clock reference is not locked” Click on the OK button.
2) Now do the same for the remaining 192’s
3) Next, under “Clock Source” you will select “Sync I/O”
4) You should now see a message that says “The Sync I/O clock reference is now locked”
If you are using Apogee converters (AD/DA-16X’s or Rosetta’s via the X-HD card) and you are not using
192’s at all, you will not have to do the following previous 4 steps. The Apogee units will automatically
lock to external W/C when the Sync I/O is set to master.
APOGEE
Connects:
