APLIC 302655/20170601SZ187, Manual

Page: 19 / 72

19
English
Take the supplied rubber mounting ring and hook it into the bracket
fixture provided for this purpose, so that the bracket sits firmly on
the handlebar.
Note:
- Ensure that the metal contacts of the bracket are facing down becau-
se the bicycle computer may otherwise be mounted incorrectly.
- Alternatively, you can mount the bicycle computer on the centre rod
of your bicycle. To do this, you need to unscrew the curve of the bracket
and mount it with a 90 ° offset.
Installing the transmitter (with cable)
Glue the long foam plate to the inside of the transmitter and place it on
the wheel fork. Fix the sensor using the cable ties provided. The sen -
sor side of the transmitter should point towards the spokes. However,
ensure that the sensor does not come into contact with the spokes.
Crossbar