Aplex APC-3X65 User Manual Download Page 64

Page: 64 / 80

APC-3X65 User Manual

Chapter 5 Touch Screen Installation

This chapter describes how to install drivers and other software that will allow your PenMount 6000
Controller Board to work with different operating systems.

NOTE:

PenMount USB drivers support up to 15 USB controllers.

5.1 Introduction to Touch Screen Controller Board

PenMount 6300 USB control board is a touch screen control board designed for USB interface and

specific for 4, 5, 8-wire touch screens. It is designed with USB interface features with multiple devices

supporting function. PenMount 6300 control board using PenMount 6000 controller that has been

designed for those who may like and all-in-one solution with 10-bit A/D converter built-in to make the

total printed circuit board denser, circuit diagram also designed for 12-bit ADC for optional. There are

two connectors on this board, one connector is for 4, 5, 8-wire touch screen cable (optional), and

another is for 4-pin USB A type cable (optional).

Figure 5.1: Bird

’s Eye View of Control Board

5.2 Windows 2000/XP/2003/Vista Universal Driver Installation

for PenMount 6000 Series

Before installing the Windows 2000/XP driver software, you must have the Windows 2000/XP system

installed and running on your computer. You must also have one of the following PenMount 6000

series controller or control boards installed: PM6500, PM6300.

5.2.1 Installing Software

If you have an older version of the PenMount Windows 2000/XP driver installed in your system, please

remove it first. Follow the steps below to install the PenMount DMC6000 Windows 2000/XP driver.

Summary of Contents for APC-3X65

















































































Search results

Summary of Contents for APC-3X65

Reviews:

Brands by name

Popular brands

Aplex APC-3X65, User Manual

Search results

Summary of Contents for APC-3X65

Reviews:

Brands by name

Popular brands