Aplex AHMI-8 Series User Manual Download Page 103

Page: 103 / 120

AHMI

-8XX Series User Manual

102

5.2

Software Functions

5.2.1 Software Functions(Resistive Touch)

Upon rebooting, the computer automatically finds the new 6000 controller board.

The touch screen is connected but not calibrated. Follow the procedures below to

carry out calibration.

1. After installation, click the PenMount Monitor icon “PM” in the menu bar.

2. When the PenMount Control Panel appears, select a device to “Calibrate.”

PenMount Control Panel(Resistive Touch)

The functions of the PenMount Control Panel are

Device, Multiple Monitors

Tools

and

About

, which are explained in the following sections.

Device

In this window, you can find out that how many devices be detected on your system.

Calibrate

This function offers two ways to calibrate your touch screen. ‘Standard Calibration’

adjusts most touch screens. ‘Advanced Calibration’ adjusts aging touch screens.

Summary of Contents for AHMI-8 Series

























































































































Search results

Summary of Contents for AHMI-8 Series

Reviews:

Brands by name

Popular brands

Aplex AHMI-8 Series, User Manual

Search results

Summary of Contents for AHMI-8 Series

Reviews:

Brands by name

Popular brands