Aplex ACS-2695 User Manual Download Page 11

Page: 11 / 97

ACS-2695 User Manual

1.3 Brief Description of the ACS-2695

The ACS-2695 is a Fan-less High-efficiency Thermal Solution Box PC, powered by Socket G2, 2nd

Generation Intel Core i7/i5/i3 processor and supporting 4 x USB 2.0 ports, 4 x COM Ports, 1 x DVI-I,

support 2 x SATA HDD space, 1 x external CF slot, 9~32V wide-ranging power input etc. It is ideal for

Industrial Automation, Factory Automation, Machine Vision, Process Control, Data Terminal, TI,

Surveillance, etc. and running factory operations from small visual interface and maintenance

applications to large control process applications. The ACS-2695 works very well along with any of our

Display series and it absolutely can provide an easy way to perform control and field maintenance.

Figure 1.5: Left-front View of ACS-2695

Figure 1.6: Right-front View of ACS-2695

Summary of Contents for ACS-2695


































































































Search results

Summary of Contents for ACS-2695

Reviews:

Related manuals for ACS-2695

Brands by name

Popular brands

Aplex ACS-2695, User Manual

Search results

Summary of Contents for ACS-2695

Reviews:

Related manuals for ACS-2695

Brands by name

Popular brands