3
DETAILED ASSEMBLY INSTRUCTIONS
Assembly of the Cutting Jig
1.
Insert the two bolts (part K) through the holes of the cutting jig (rear component; part F).
2.
Slide the blade (part H) through the bolts and place it against the cutting jig.
The orientation of the blade is critical.
3.
Select a pair of spacers (part G) with the same thickness and slide them through the bolts. The cartilage
slice obtained using the device will have a thickness equal to the thickness of the spacer selected.
Sharp edge of
blade and
notched side
of cutting jig
should be on
the same side.
Beveled side
of blade
should be
facing down
and towards
the cutting
jig.
The spacers should be positioned
so that they do not block the
center of the cutter.
