background image

Rev. A2, 9/09

VBL Series

3

Automation Products Group, Inc.

APG...Providing tailored solutions for measurement applications

Tel: 1/888/525-7300 • Fax: 1/435/753-7490 • www.apgsensors.com • [email protected]

 APG warrants its products to be free from defects of material and workmanship
and will, without charge, replace or repair any equipment  found defective upon
inspection at its factory, provided the equipment has been returned,
transportation prepaid, within 24 months from  date of shipment from factory.

 THE FOREGOING WARRANTY IS IN LIEU  OF AND EXCLUDES ALL OTHER
WARRANTIES NOT EXPRESSLY SET FORTH  HEREIN, WHETHER
EXPRESSED OR  IMPLIED BY OPERATION OF LAW OR  OTHERWISE
INCLUDING BUT NOT LIMITED  TO ANY IMPLIED WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR A  PARTICULAR PURPOSE.

No representation or  warranty, express or implied, made by any sales
representative, distributor, or other agent or  representative of APG which is not
specifically set  forth herein shall be binding upon APG.  APG shall  not be liable
for any incidental or consequential  damages, losses or expenses directly or
indirectly arising from the sale, handling, improper application or use of the
goods or from any other cause relating thereto and APG’s liability  hereunder, in
any case, is expressly limited to the  repair or replacement (at  APG’s option) of
goods.

 Warranty is specifically at the factory.  Any on site service will be provided at
the sole expense of the Purchaser at standard field service rates.

 All associated equipment must be protected by properly rated electronic/
electrical protection devices.  APG shall not be liable for any damage due to
improper engineering or installation by the purchaser or third parties.  Proper
installation, operation and maintenance of the product becomes the
responsibility of the user upon  receipt of the product.

 Returns and allowances must be authorized by APG in advance.  APG will
assign a Return Material  Authorization (RMA) number which must appear on
all related papers and the outside of the shipping carton.  All returns are subject
to the final review by APG.  Returns are subject to restocking charges as
determined by  APG’s “Credit Return Policy”.

•  

 

Warranty and Warranty Restrictions

Summary of Contents for VBL Series

























Reviews: