Processor SPWX 7
CONTROLS DESCRIPTION
FRONT PANEL
1) Hard-Bypass (1 +2) / (3 +4):
This feature pairs to disable the processor, to isolate the amp and
can be used without other forums have changed the internal wiring.
2) DX15/DX12:
This function is used to select the speakers DX15 or DX12.
3) Stand / Floor:
Pressing this key switches the mode "stand" when speakers are set up on a stand. Then, the
frequency response is useful for high precision vocal reproduction and medium throw
application (distributed sound system).
By disabling this key switches the mode "floor” when speakers are coupled with the floor. In
this case the effect of the coupling with the floor allows all kind of full range musical
application stage and near field monitoring.
4) HF EQ:
This knob controls the clarity of the system to change the spectral balance of the system
depending on the acoustic environment, listening distance and coupling effects.
5) Signal LED:
This LED is used to display the presence of a signal higher than - 20 dB on each output.
6) With / off Sub (3&4 only):
Pressing this key activates a subwoofer channel on the output of
channel 3 and inserts a high-pass filter in the response of channel 4 for the crossover between speaker
and subwoofer.
7) Sub Level:
This knob controls the sub level when the function 6° is activated. A centre position, the
trigger materializes the nominal level of the subwoofer. The range is from infinite attenuation to 6 dB
gain. It is advisable to adjust the subwoofer channel level after installation of speakers.
8) Power:
This LED indicates the presence of voltage. The processor can be left running continuously;
there is no power switch.
1
4
7
8
2
3
5
6
