background image

Processor SPWX                                                                                                                                                 3                                                                                           

UNPAKING

 

Thank you for choosing this processor APG. Please take a moment to read the contents of this 
manual. 
 
All APG Products are carefully designed in order to provide performance and reliability of high level. 
Do not hesitate to contact us or visit our website for more information on APG products. 
Website:

 

www.apg-audio.com

 

Email: 

[email protected]

 

 
Unpacking PROCESSOR SPWX APG

 

Once the product is out of the box, please check that product is not damaged. 
If the unit is damaged, notify the carrier and make the claim. 
Please keep the packaging for future use. 

 
Instructions 

This manual provides a detailed description of all functions of the SPWX processor. 
 

IMPORTANT SAFETY INFORMATION

 

Please read and keep these instructions and warnings. Follow all warnings and all instructions. 
 

 

Do not open the device. 

 

Maintenance of internal components must not be done by user. 

 

Service and maintenance must be carried out by qualified personnel. 

 

This device must be connected to a grounded power outlet. 

 

Avoid cord to be stepped on and protect device against damage. 

 

Pay particular attention to plugs. 

 

Only use attachments / accessories specified by the manufacturer. 

 

Have the product controlled if damaged (power cable or plug damage, for example), in case 
of  infiltration of liquid or objects into the case, if the unit has been exposed to rain or 
humidity, does not operate normally or has been dropped. 

 
 

 

Summary of Contents for SPWX











Reviews: