35
(１)
Prepare
Pressing the button DOWN will show [Ready!] to flash on
screen placing the unit in stand-by mode. (If pressed during
driving, [Ready!] will appear after the car has stopped. Real
Time display of speed will occur during driving.)
(２)
Measure
During Stand-By, when the unit receives an input signal from
the vehicle speed signal (when the tires start to spin),
measurement will begin.
(３)
Finish Measurement
Measurement will stop once the specified Distance has been
reached.
Measuring Stand-By
②
Measure
Measuring Mode
Measure
■
Clear Records
In Records Mode, push Right to enter Records Clear
Mode. Select the record to clear using the UP and
DOWN button. Pushing the Center button will clear
the record.
In Records Clear Mode, pushing the button to the
Right will go to Measure Mode, and pushing the Left
button will go to Records Mode.
Ｒｃ
Measuring Mode
Records Mode
Clear
Cleared Records
■
View the Best 5 Records
In Measuring Mode, pushing the
center button and selecting Rc will
activate the Records Mode. Press
UP or DOWN to view desired
record.
View the Best 5 Records, Clear the Records
●
Caution when installing the optional G Sensor (separately sold)
The G Sensor corrects the vehicle speed signal. Incorrect installation and
calibration of the G Sensor will cause incorrect readings.
⇒
G Sensor Calibration
Measure Mode
Select
Select
