1
5
Fig. 10
MOUNTING THE SMALL BRUSHES
To clean small or hard-to-reach surfaces,
we recommend using the small brushes
46-47-48-49, attached to the curved steam
nozzle 32.
The two reference marks on the brushes
and on the steam nozzle must line up, then
press the two components one against the
other to couple them (fig. 10).
To remove the brushes, grasp and pull
them out.
49
32
USE
WATER
FILLING THE TANk WITH
APX750
ATTENTION
Before filling the water tank, disconnect the
machine from the power source.
before filling the water tank, make sure that:
1) plug 10 is unplugged
2) the machine is on a flat surface.
CAUTION
Your steam cleaner has been designed
for use with normal tap water. In order to
extend the life of this product, if the degree
of water hardness is very high in your area,
recommend using 50% tap water with
50% distilled water. Do not use other liquid
(chemical, fragances, etc...).
Then:
1)
2)
remove the tank plug 1 by turning it
counter-clockwise and pour water up to
the max level.
refit and tighten plug 1.
For this operation, we recommend using the
filling bottle 43 provided.
