1
4
Fig. 8
D
MOUNTING THE CLEANING CLOTHS
ON THE BRUSHES
The rectangular brush 21 and the
triangular brush 26 (if any) are fitted with
a holding device for the attachment of a
cleaning cloth.
1) Lay a cloth on the ground and set the
brush right in the middle.
2) Press the upper part of the spring-
fitted cloth holders D to lift them up.
With the other hand, position the front
and rear edges of the cloth under the
holders. Once released, they will hold
the cloth in position (fig. 7-8).
To remove the cloth from the brush, press
the holders to lift them up.
To use a cloth on the triangular brush 26,
proceed as above using the spring-fitted
cloth holders (fig. 9).
Fig. 7
Fig. 9
USE
