52
7.5.2 Set up
7.5.2.1 Set up date and time
Press “SET” button for adjusting the parameters of the recorder while in the stand-by mode.
Press increase (
▲
) or decrease (
▼
)
until “1. Date / Time” displayed as shown in Figure 71.
Figure 71
Press “Set” button for editing the contents, and then press increase (
▲
) and/or decrease (
▼
)
button until current Date and Time presented.
The “Set” Button should be press for entering the parameter that you have changed, and
shift to next parameter.
The sequence is in the order of Year-Month-Date-Hour-Minute-Second each time you press
the “Set” button.
A
fter entering the current Date and Time, press “Set” button returns to the Set manual, and
then to choose “8 EXIT” press “Set” button again returns to the stand-by mode as shown in
Figure 70.
Figure 72
7.5.2.2 Set up unit (temperature and pressure)
Press “SET” button for adjusting the parameters of the recorder while in the stand-by mode.
Press increase (
▲
) or decrease (
▼
)
until “2. Unit” displayed as shown in Figure 73.
Figure 73
Press “Set” button for editing the temperature unit or pressure unit, and then press increase
(
▲
) and/or decrease (
▼
) button until the desired temperature unit or pressure unit
presented as shown in Figure 74.
Figure 74
1. Date / Time
2016- Apr-02
13:30:30
2. Unit
Temp:
°
C
Pressure: bar
Pressure: Bar
