13
After the installation is complete, open the printer and test the following functions:
1. Machine power switch, press to see if it can be turned on normally.
If it can't be powered, please check if the emergency switch is pressed.
2. Anti-collision sensor switch, if it is turned on, start the induction.
3. and 4 are the color and white negative pressure cleaning buttons.
5. Negative pressure value display panel, check if the negative pressure
value is within the range of 2.6~4.0.
6. Positioning bolt switch.
7. Alarm switch for positioning bolt. Make sure the positioning bolt is
closed during printing.
8. Vacuum switch
3
4
5
1
2
6
7
8
3.
Installation and Operation
3.5 Control panel button function
