11
Picture 1. Connect the wires and water lines according to the mark on the
wire and tank connections. There is no need to distinguish between
inlet or outlet pipes.
Picture 2. Add water to the tank to prevent water from flowing to the tank.
Picture 3. Open the water tank switch and check if the water temperature
display panel, fan and pump are working properly. The added water
fills all empty water pipes and then replenishes the water.
Note: Antifreeze liquid must be used in cold weather andicy areas:
50% ethylene 50% pure water.
Water outlet
Water inlet
AC Power
Right UV lamp power line
Left UV lamp power line
Left UV lamp signal line
Right UV lamp signal line
Water level indicator
Present Temperature
Power Switch
Indoor Temperature
Working
indicator
Abnormal
indicator
UV lamp intensity control
3.
Installation and Operation
Picture 3
Picture 1
Picture 2
3.3 UV LED Water cooling system installation
