TV Setup
TV Channel Setup
& Channel
Auto Scan
17
Select antenna options and perform Channel Auto Scan to receive television channels that will be stored into the TV tuner memory.
To enter TV Mode:
Press the
MENU
button
Using the
W
X
arrow buttons;; scroll to highlight
TV
mode
Press the down
T
arrow button to highlight
CABLE
or
AIR
Select
AIR
when connected
to an indoor/outdoor
antenna to receive local TV
broadcasts. Connect an-
tenna wire to the television.
Press the
W
X
arrow
button to highlight
AIR.
Press the down
T
arrow
button to select
Auto Scan
then press the
X
right arrow
button twice to start Chan-
nel Auto Scan.
Channel Auto Scan
may
take several minutes to
complete.
Select
CABLE
if you subscribe
to a pay television service
without the use of a set top box.
Connect cable wire to the televi-
sion (see page 10).
Press the
W
X
arrow button to
highlight
CABLE.
3UHVVWKH
T
arrow button
to select AUTO SCAN. Press
ENTER
and the cursor will move
up and CABLE SYSTEM will be
displayed next.
3UHVVWKH
X
arrow button to
select STD > IRC > HRC > Auto
(Auto is recommended).
3UHVVWKHGRZQ
T
arrow button
to select Auto Scan and press
ENTER
.
NOTE
:
Channel Auto Scan
may
take several minutes to com-
plete.
Cable Mode
NOTE: For cable or satellite
users without an indoor/
outdoor TV antenna, there is
no need to perform Channel
Auto Scan. Connect your
cable or satellite set top box
to one of the available inputs
on the TV for viewing. See
pages 11-13 for connection
details.
Air Mode
