Apex Digital EZ Sander EZ3760M, Operation Manual

Page: 8 / 71

8
24. Stand to one side of the conveyor table and do not let anyone else stand in line with the table while a
workpiece is being fed through the machine.
25. For wood sanders do not attempt to sand stock shorter than 12 inches long without butting a board
of equal thickness
behind it to help it through the machine. Do not sand stock less than 1/8” thick.
26. Never reach into a running machine. Turn off and disconnect from power source before attempting to
retrieve parts from within the machine.
27. Use the right belt at the correct speed and feed rate. Do not force a sanding belt to do a job for
which it was not designed. The right belt will do the job better and safer.
28. Use recommended accessories; improper accessories may be hazardous.
29. Turn off the machine and disconnect from power before cleaning. Use a brush or compressed air to
remove chips or debris
— do not use your hands.
30. Do not stand on the machine. Serious injury could occur if the machine tips over.
31. Never leave the machine running unattended. Turn the power off and do not leave the machine until
all parts come to a complete stop.
Familiarize yourself with the following safety notices used in this manual
:
This means that if precautions are not heeded, it may result in minor injury and/or
possible machine damage.
This means that if precautions are not heeded, it may result in serious injury or
possibly even death.
Introduction
This manual is provided by APEX Machine Group covering the safe operation and
maintenance procedures for an E Z Sander Wide Belt Sander. This manual contains
instructions on installation, safety precautions, general operating procedures,
maintenance instructions and parts breakdown. This machine has been designed and
constructed to provide years of trouble free operation if used in accordance with
instructions set forth in this manual. If there are any questions or comments, please
contact either your local dealer or APEX Machine Group who can also be reached at
our web site:
www.apexmachinegroup.com or www.ezsanders.com
( 855-500-7263 ) or ( 952-224-2899 )