manualshive.com logo in svg

Apex Digital Apex EmergeCard Remote Access, User Manual

Share
Download
Apex Digital Apex EmergeCard Remote Access User Manual Download Page 18

 

Emerge Card Remote Access User Guide 

Installation 

••••

 14 

 

To connect to a user pod  

1  Make sure the Emerge system is turned off and unplugged. 

2  Place the Emerge system in the desired location. The maximum cable length between the Emerge 

and the target system should be no longer than 12 feet.  

3  Connect the mouse, video, and keyboard interconnecting cables to their respective jacks on the 

back panel of the EmergeCard. 

4  Connect the other end of the mouse, video, and keyboard interconnecting cables to their 

respective jacks on the user pod. 

5  Connect the local mouse and keyboard to the jacks marked with their respective symbols on back 

panel of Emerge.  

6  Plug in your remote access connection to the modem or network connection port. 

7  Plug the power cord into its socket on the back panel of the Emerge system. 

 

Summary of Contents for Apex EmergeCard Remote Access





















































Reviews:

No comments

Brands by name

Popular brands

Load more brands