XT Auto/ English
12
5. Adding a Humidifier
XT Auto CPAP device can be used with XT Heated
Humidifier
(9S-006500)
which is available from the
home care provider. The heated humidifier may
reduce nasal dryness and irritation by providing
adequate moisture and heat to the airflow. Please
refer to the XT heated humidifier
(9S-006500)
instruction manual for complete setup
information.
NOTE:
When XT Auto CPAP device is used with the heated humidifier, its power supply is from the
power socket outlet of the heated humidifier. Do not connect the power cord to CPAP
device and plug into main electrical outlet.
6. Using the SD Card to Collect Data
If physicians need to review the usage data, they may ask you to use the SD card to copy data from
the device, and to return the card to them. Data that is copied to the SD Card is still stored and
available on the device.
1.
Insert the SD Card when the device is in standby mode.
2.
Data copying starts automatically when the SD Card is inserted into the slot.
3.
The
[COPY] & [Card]
messages are displayed on the LCD while data is being copied.
4.
The
[End] & [OK]
messages are displayed on the LCD when copying has finished.
5.
Remove the SD Card and mail it to the clinician.
6.
The SD card does not need to be uninstalled for the device to work properly.
CAUTION:
Do not remove the SD card until
[End] & [OK]
messages are displayed on the LCD,
or data copied to the card may be corrupted or missing.
