XT Auto/ English
7
4. Operation
NOTE:
Always read the operating instruction before use.
4.1
Control Panel Description
Buttons arrangement on control panel and main use of the buttons:
START/STANDBY
To start the treatment, simply press the
"START/STANDBY"
button. To stop the treatment,
press the
"START/STANDBY"
button again. The display will switch between
[STANDBY]
and
Therapy Pressure
[ XX.X
cmH
2
O]
in cmH
2
O unit.
MENU
Press the
"MENU"
button to enter the setting mode when device is in standby mode. The
adjustment setting includes mode selection, ramp time selection,
ramp starting pressure,
therapy pressure adjustment, initial pressure adjustment, maximum pressure adjustment,
minimum pressure adjustment, alarm ON/OFF, clock alarm and clock setting, compliance
meter, and total operating meter. When each setting's value has been changed, press
"MENU"
for confirmation and press
"MENU"
again for next setting selection. Please refer to
4.2 Function Description section for detailed information.
UP
Press the
"UP"
button to increase the value.
DOWN
Press the
"DOWN"
button to decrease the value.
