3.Install Fan Speed Controller, Fan Connectors, Front LED Lights, LCD and Temp. Sensors:
3.1.Find the two black-and-yellow cable connectors
3.2.Connect the INPUT connector to PSU
from front panel, one with INPUT CD 12V, the
4-pin connector.
other with OUTPUT 0.3A 5 FAN MAX 1.2A.
These two connectors are for Fan Speed Connector
and fan connection
.
3.3.Linke all 5 fans(2*Back Fans, 1*Side Window Fan,
3.4.Find green-and-white 2-pin cable connector for
1*Front Fan, 1*Top Fan) together(Male to Female).
LED. Then, find the black-and-red twisted 4-pin
Then connect 1*4-pin Male end to OUTPUT 0.3A
cable connectors for LCD. Connect the LED 2-pin
5 FAN MAX 1.2A Connector.
Male connector to LCD 4-pin Female connector.
3.5.Then, connect the 4-pin Male connector
3.6.There are two temperature sensors for front LCD
for LCD to PSU 4-pin Female connector.
temperature readout. You can tape the sensor to Heatsink
to detect CPU temperature, or tape on HDD to detect
HDD temp, or just let it hang inside the case to monitor
overall
system
temperature.
