2.Install Power Connection, LED’s and Front Panel Leads, USB and 1394 Firewire Cables:
2.1.Install 20-pin cable connector from power
2.2.Install 4-pin cable connector to motherboard.
supply to motherboard. Please refer to MB manual
(This is for P4 MB only) Some P4 motherboards may
not need to install this. Please refer to MB manual.
2.3.Connect 4-pin cable connectors from
2.4.LED’s and Front Panel Leads-Power SW,
power supply to all 3.5” and 5.25” devices.
Power LED, HDD LED, Reset SW and Speaker.
2.5.Connect LED’s and Front Panel Leads to MB
2.6.Find USB pin position from your MB manual.
-Power SW: Connect to MB “PWR”
Connect USB cable to USB header on MB.
-Power LED: Connect to MB “PLED”
-HDD LED: Connect to MB HDD/IDE LED connector
-Reset SW: Connect to MB “RSW”
-Speaker: Connect to MB 4-pin connector
2.7.IEEE1394 Firewire cable connector
(9-pin consists of 6 wires). Please refer to
MB user’s manual.
