X-Navigator Installation Guide:
(All screws for MB, DVD, HDD and case keys are provided in Tool Box)
1.Install Motherboard, 3.5” & 5.25” Drives:
1.1.Remove two thumb screws
1.2.Install brass standoffs on the
1.3.Place your motherboard on
from the back of the side window.
right solid panel for MB.(Some
the brass standoffs. Screw in
Push the handle towards front
motherboards have different
your motherboard to standoffs
panel a bit, then pull it out.
layout. Please refer to MB manual.
with motherboard screws.
1.4.Remove 3.5” HDD Cage.
1.5.Put the 3.5” HDD Cage
1.6.Attach drive rails on both sides of
Install 3.5” drives to the cage.
back in place.
5.25” drives. (You can rails mounted
on
the
bottom
of
the
case)
1.7.Remove the 5.25” bay covers.
1.8.Slide 5.25” drive into its bay.
Insert your index finger on the side,
push with pressure to the left and
and pull out as shown on the picture.
