Recommended settings
Settings home cinema system
In this method, the AV receiver or AVR is the central control point of the system and is responsible for the
bass management (splitting the frequency spectrum between speakers and subwoofer).
In this case, use the following settings on the subwoofer:
CROSSOVER:
160 Hz
PHASE:
0°
VOLUME:
9 Uhr (depending on the calibration system)
Settings music system
When using an amplifier that does not offer its own bass management, the bass management can be taken
over by the subwoofer.
In this case, use the following settings on the subwoofer:
CROSSOVER:
Set the frequency response knob to a setting that provides a seamless transition
with your speakers. If you are using small speakers with low lower boundary
frequency, a high frequency (for example, 100-160 Hz) should be selected. For
larger loudspeakers with stronger bass reproduction, a lower frequency (e.g., 60-
100 Hz) should be selected.
PHASE:
Set the control to a setting that provides maximum bass with your speakers
(depending on the speaker).
VOLUME:
Set the control to a setting that matches the volume of your speakers.
5
Summary of Contents for Bravus II 10D
Page 1: ...User manual Bravus 1...