POWER
This toggle switch is the main switch of the device. It can be set to "ON" and "OFF". If the device is not going
to be used for a long time (eg when you are on vacation), the main power switch should be turned off and the
power cord disconnected.
Power connection
Connection for the mains plug and container for the device fuse.
Installation
RCA cables
To connect the subwoofer, use high quality shielded coaxial cables. Poor quality cables may pick up noise
and cause hum or noise. Keep the length of the cable as short as possible and route signal cables separate
from the power cables to reduce the potential for induced noise.
Loudspeaker cables
For distances of less than 15 m, we recommend using 2.5 mm² speaker cables to ensure high-quality signal
transmission. For distances over 15 m we recommend the use of 4 mm² speaker cables.
Positioning
Subwoofers work in a frequency range that is primarily emitted in spherical form. However, you should keep
in mind that the sound and depth of the subwoofer depend substantially on its position and the place of the
listening position. If the subwoofer is placed incorrectly, the overall listening pleasure can be significantly
reduced. It usually requires some experimentation to find the optimum position for the subwoofer. Therefore,
we recommend that you follow the instructions below and place the subwoofer in one of the recommended
positions.
In most rooms, the optimum location for the subwoofer is in the area closest to the listening position. This
positioning ensures optimal coupling of the subwoofer to the room. If two subwoofers are used, positioning
the two subwoofers in the front two corners is preferable. Optimum four subwoofers are used and placed in
each corner. This stimulates the room as evenly as possible. Experiment with different positions before you
finally decide. For this you should choose a piece of music or a film scene, which you know very well and
play it with different placement of the subwoofer again and again. If you have an acoustic measurement
system, you can determine the optimal placement by measuring the different positions.
4
Summary of Contents for Bravus II 10D
Page 1: ...User manual Bravus 1...